Napoleon Inspiration ZC Série Manuel D'installation Et D'opération page 12

fi nishing
EN
3.2 safety barrier & door removal and installation
WARNING
!
• Glass may be hot. Do not touch glass until cooled.
• If equipped with door latches that are part of a safety system, they must be properly engaged. Do not
operate the appliance with latches disengaged.
• Facing and/or fi nishing materials must not interfere with air fl ow through air openings, louvre openings,
operation of louvres, or doors/access for service. Observe all clearances when applying combustible
materials.
• Before door is removed, turn the appliance off and wait until appliance is cool to the touch. Doors are heavy
and fragile so handle with care.
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the appliance and shall
be installed. Before the glass door can be removed, the safety barrier must be removed. Lift the safety barrier up
and remove from the appliance. Reverse these steps to reinstall the safety barrier.
Place the door into the two lower door brackets then secure at the top of the appliance with two #10-24 machine
screws. Reverse these steps to reinstall the safety barrrier and door. Ensure safety barrier is installed correctly.
12
W415-2359 / 08.22.19
!
!
LOWER DOOR BRACKET
ONLY:
ONLY: