Date & Time - Carl Valentin Dynacode 53 Guide De Référence Rapide

Dynacode
Date & Time
Keys: , , ,
Key:
Key:
Key:
Key:
Key:
Key:
Key:
Key:
Key:
114
, , , ,
Set date and time:
The upper line of display shows the current date, the second line the current time.
With keys and you can change to the next or previous field. With keys
can increase and/or decrease the displayed values.
Summertime:
On: Module automatically adjust clock for daylight saving changes.
Off: Summertime is not automatically recognized and adjusted.
Start of summertime (format):
Select the format in which you want to define beginning summertime.
DD = day, WW = week, WD = weekday, MM = month, YY = year,
next day = only next day is taken into consideration
Start of summertime (date):
By means of this function you can enter the date at which summertime has to start. This entry
refers to the previously selected format.
Example: summertime is automatically adjusted at last Sunday in March (03).
Start of summertime (time):
By means of this function you can define the time when you want to start summertime
End of summertime (format):
Select the format in which you want to define end of summertime.
End of summertime (date):
By means of this function you can define the date when you want to stop summertime. The
entry refers to the previously selected format.
Example: summertime is automatically adjusted at last Sunday in October (10).
End of summertime (time):
By means of this function you can define the time when you want to stop summertime.
Time shifting:
By means of this function you can enter time shifting in hours and minutes (for automatically
adjustment from summer and wintertime). This entry refers to the currently set module time.
English
, , ,
and you