Layout Settings - Carl Valentin Dynacode 53 Guide De Référence Rapide

Continuous mode
Key:
Check material speed at print start signal:
Verification of material speed at print start signal.
Key:
Encoder resolution / material feed per encoder rotation:
indicates resolution of used encoder and material feed per
rotation of encoder in mm.
Key:
Material speed:
Indication of material speed (only for reading purposes).

Layout Settings

Keys: , ,
Key:
Key:
Key:
Key:
Key:
Key:
Printlength: Indication of way which the print mechanics has to move. The print length
depends on the length of the print mechanics.
Column printing:
Indication of width of one layout as well as how many layouts are placed side by side.
Material: Selection of the used print materials.
Flip layout:
The axis of reflection is in the middle of the layout. If the layout width was not transferred to the
print module, automatically the default layout width i.e. the width of the printhead is used. It is
recommended to use layouts with the same width as the printhead. Otherwise this can cause
problems in positioning.
Rotate layout:
According to standard the layout is printed ahead with a rotation of 0°. If the function is
activated, the layout is rotated by 180° and printed in reading direction.
Alignment:
The adjustment of layout is effected only after 'flip/rotate layout', i.e. the adjustment is
independent of the functions flip and rotate.
Left: The layout is aligned at the left-most position of printhead.
Centre: The layout is aligned at central point of printhead.
Right: The layout is aligned at right-most position of printhead.
English
Intermittent mode
Key:
Layouts/cycle:
Indication of number of printed layouts per print start (cycle).
Value range: 1 ... 25 layouts per cycle.
Dynacode
107