Device Settings - Carl Valentin Dynacode 53 Guide De Référence Rapide

Device Settings

Keys: , , ,
Key:
Key:
Key:
Key:
Key:
Key:
Key:
Key:
Key:
,
Field handling:
Off: The complete print memory is deleted.
Keep graphic: A graphic res. a TrueType font is transferred to the direct print module once
and stored in the direct print module internal memory. For the following print order only the
modified data is transferred to the direct print module. The advantage is the saving of
transmitting time for the graphic data.
The graphic data created by the direct print module itself (internal fonts, bar codes, ...) is
generated only if they were changed. The generating time is saved.
Delete graphic: The graphics res. TrueType fonts stored in the internal memory is deleted but
the other fields are kept.
Restore graphic: At the end of the print order the printed order can again be started at the
direct print module. All graphics and TrueType fonts are again printed.
Exception: With column printing always full columns must be printed (number of pieces
always multiple of the columns). Deleted columns are not restored.
Codepage:
Indication of the font used in the direct print module.
External parameters:
Layout dimension only: The parameters for layout length, gap length and layout width can be
transferred to the printing system. All other parameter settings are to be made directly at the
printing system.
On: Sending parameters such as print speed and contrast via our layout creation software to
the direct print module. Parameters which are set directly at the direct print module before are
no longer considered.
Off: Only settings made directly at the direct prin module are considered.
Buzzer:
An acoustic signal is audible when pressing a key.
Value range: 1 ... 7.
Off: No signal is audible.
Language:
Selection of language in which you want to display the text in the display of control unit.
At the moment the following languages are available: German, English, French, Spanish,
Portuguese, Dutch, Italian, Danish, Finnish, Polish, Czech and Russian.
Customized entry
On: The question referring the customized variable appears once before the print start at the
display.
Auto: The question referring the customized variable appears after every printed layout.
Off: No question appears at the display. In this case the stored default value is printed.
Hotstart:
On: Continue an interrupted print order after switching on the module anew.
(Only if module is equipped with option Compact Flash card)
Off: After switching off the direct print module the complete data is lost.
Password:
By a password several functions can be blocked, so the user cannot work with them.
Layout confirmation:
On: A new print order is only printed after confirmation at the device.
An already active continuing print order is printed as long as the confirmation is effected at the
device.
Off: No query appears at the display of control unit.
English
Dynacode
111