Ribbon Save (Intermittent Mode) - Carl Valentin Dynacode 53 Guide De Référence Rapide

Dynacode

Ribbon Save (Intermittent Mode)

Keys: , , ,
Key:
Mode: Standard
Key:
Key:
Key:
Key:
Mode: Shift
Key:
Key:
110
Mode:
Selection of ribbon save mode.
Off: Ribbon save set to Off.
Standard: Maximum ribbon save performance.
Shift: Maximum utilization of transfer ribbon.
Rewind correction:
0 mm = It is always so far retreated that an optimal ribbon save is reached.
Default: 0 mm
−xx mm = The retreat can be made smaller.
+xx mm = The retreat can be made larger.
ExpertParameters (password protected):
Enter password, press key
indicated:
PhDownT = printhead down time in ms:
Is used from ribbon save algorithm to use for the calculation of start time of printhead
downward movement.
PHupT = printhead up time in ms:
Is used from ribbon save algorithm to calculate if a field ribbon save can be made or not.
PhVReactT = valve reaction time in ms:
The time is calculated when to start with printhead upward movement.
Tension / Ribbon Mode:
Tension: Indication of length that is transported forwards after measuring the transfer ribbon.
Ribbon Mode:
0: The transfer ribbon is retracted after each printout over the complete print length, i.e. no
ribbon save between the individual layouts.
1: The transfer ribbon is only retracted over the printed sector, i.e. the gaps between the
layouts were not optimised.
When changing the layouts, the transfer ribbon is positioned automatically
X-Shift and Y-Shift:
X-Shift: Indication of displacement of the printout in X direction.
Y-Shift: Indication of displacement of the printout in printing direction.
Lanes / R-Shift:
Lanes: Indication of number of lanes printed side by side.
R-Shift: Indication of distance when changing to a new lane.
ExpertParameters (password protected):
Enter password and press key
See mode 'Standard' for description of the parameters.
English
to confirm the entry and the following parameters are
to confirm the entry.