Print Settings; Machine Parameters - Carl Valentin Dynacode 53 Guide De Référence Rapide

Dynacode

Print Settings

Keys:
Key:
Continuous mode
Intermittent mode
Key:
Key:

Machine Parameters

Continuous mode
Keys: ,
Key:
Mode:
Selection of operating mode.
Key:
Print Offset:
Distance of the layout to the zero point of machine.
Value range: 1 ... 999 mm
Key:
Print position:
Start position of print carriage in mm.
Value range: 12 ... 93 mm
Key:
Layouts/cycle:
Indication of number of printed layouts per print start (cycle).
Value range: 1 ... 25 layouts per cycle.
106
Contrast:
Value range: 10 % ... 200 %.
Speed:
Value range: 50 mm/s ... 200 mm/s.
Contrast:
Value range: 10 % ... 200 %.
Ribbon control:
Off: The ribbon control is deselected, i.e. the printer continues without an error message.
On, weak sensibility: The current print order is interrupted and an error message appears at
the display of the printing system. The printing system reacts at approx. 1/3 more slowly to the
end of the transfer ribbon (default).
On, strong sensibility: The current print order is interrupted and an error message appears at
the display of the printing system. The printing system reacts immediately to the end of the
transfer ribbon.
X displacement:
Indication of displacement in X direction. The fields on the layout are moved.
Value range: −90.0 to +90.0.
English
Intermittent mode
Keys: ,
Key:
Mode:
Selection of operating mode.
Key:
Back-Speed: Indication of back speed of the print mechanics
after print end in mm/s.
Value range: 50 ... 600 mm/s.
Key:
Print Offset:
Distance of the layout to the zero point of machine.
Value range: 1 ... 999 mm
Key:
Print position:
Start position of print carriage in mm.
Value range: 12 ... 93 mm