Unpack/Pack The Direct Print Module; Scope Of Delivery; Connect The Direct Print Module - Carl Valentin Dynacode 53 Guide De Référence Rapide

Unpack the Direct Print Module
CAUTION!
Danger of injury by imprudent handling when lifting or placing the printing system.

Do not underestimate the weight of the printing system (9 ... 12 kg).

Protect the printing system against uncontrolled movement.

Lift the direct print module out of the box.

Check the direct print module for transport damages.

Check delivery for completeness.

Scope of Delivery

•
Print mechanics.
•
Control unit.
•
Power cable.
•
Connection cable (sensors, power).
•
Mini controller.
•
Manometer.
•
Pneumatic tube.
•
Push-on connector.
•
I/O accessories (female connectors for I/O, I/O 24 cable)
•
1 transfer ribbon roll.
•
Empty core, mounted on transfer ribbon rewinder.
•
Cleaning foil for printhead.
•
Documentation.
•
CD with printer drivers.
NOTICE!
Retain the original packaging for subsequent transport.

Connect the Direct Print Module

The direct print module is equipped with a versatile power supply unit. The device may be operated with a mains voltage of
110 ... 230 V AC / 50 ... 60 Hz without any adjustments or modifications.
CAUTION!
The direct print module can be damaged by undefined switch-on currents.

Set the power switch to '0' before plugging in the direct print module.

Insert the power cable into the power connection socket.

Insert the plug of power cable into a grounded electrical outlet.
NOTICE!
Insufficient or missing grounding can cause faults during operation.
Ensure that all computers and connection cables connected to the direct print module are grounded.

Connect the direct print module to a computer or network with a suitable cable.
English
Dynacode
103