Rebound Damper (Rear Suspension) - MV Agusta Brutale 675 Manuel D'utilisation

5
ADJUSTMENTS

5.7.1. Rebound damper (rear suspension)

The adjustment can be performed by operating on the screw placed on the lower side of the shock absor-
ber, and it is obtained from the standard position.
This position is found by fully rotating the screw clockwise and then counterclockwise until you hear the
first click; from this position, turn the screw counterclockwise until you reach the standard position (see
enclosed table).
Rotate clockwise to increase the damping action or counterclockwise to decrease it.
CLICK!
CLICK!
CLICK!
5 5
- 80 -