WAGNER FinishControl 3500 Mode D'emploi page 21

FinishControl 3500
Translation of the original operating instructions
Contents
1 SAFETY REGULATIONS ______________________ 16
2 EXPLANATORY DIAGRAM ____________________ 18
3 THE WAGNER CLICK&PAINT SYSTEM __________ 18
3.1 Disassembly of the spray gun __________________ 18
4 TECHNICAL DATA ___________________________ 19
5 INTRODUCTION TO SPRAYING USING THE XVLP
PROCEDURE ________________________________ 19
6 COATING MATERIAL _________________________ 19
6.1 Coating Materials Suitable for Use _______________ 19
6.2 Coating Materials Not Suitable for Use ___________ 19
6.3 Coating materials that can only be processed with rel-
evant spray attachment (accessories) ____________ 19
6.4 Preparing the coating material __________________ 19
7 SETTING THE SPRAY GUN ____________________ 20
7.1 Setting the required spray pattern _______________ 20
7.2 Setting the amount of material _________________ 20
7.3 Setting the amount of air ______________________ 20
7.4 Align the feed tube ___________________________ 20
8 STARTING OPERATION ______________________ 20
9 SPRAYING TECHNIQUE ______________________ 21
10 BREAKS IN WORK ___________________________ 21
11 TRANSPORTATION __________________________ 21
12 TAKING OUT OF OPERATION AND CLEANING __ 21
12.1 Assembly ___________________________________ 22
13 MAINTENANCE _____________________________ 22
13.1 Air filter ____________________________________ 22
13.2 Air relief valve _______________________________ 22
14 CORRECTION OF MALFUNCTIONS ____________ 23
15 ACCESSORIES AND SPARE PARTS _____________ 24
15.1 Accessories _________________________________ 24
15.2 Spare parts FinishControl ______________________ 25
15.3 Spare Parts StandardSpray spray attachment ______ 25
Testing of the unit ________________________________ 26
Note on disposal _________________________________ 26
Important information on product liability ____________ 26
Guarantee declaration _____________________________ 26
CE - declaration _________________________________ 124
European service network _________________________ 126
Explanation of symbols used
This symbol indicates a potential danger
for you or for the device.
Under this symbol you can find important
information on how to
avoid injuries and damage to the device.
Indicates tips for use and other particularly
i
useful information.
Refers to the corresponding chapter in the
operating manual and the information
presented there relating to the illustration.
Wide spray jet setting
Narrow spray jet setting
GB
CONTENTS
15