Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Do not forget to unscrew the mixing nozzle
in regular intervals and to remove possibly
calcareous residues or foreign matter. It is
advisable to replace the mixing nozzle with a
new one in the case of extreme contamination.
Maintenance
• Please note that a valve top is a wearing part
and that in the case of very hard or soiled
water the valve must be replaced every 1 to 2
years, as required.
You will find illustrated instructions on how
to replace the valve bonnet on our website
under the following link: web.fjschuette.de/
Austausch_Kartusche-Ventiloberteil.pdf
• Please check all joints and connections for
leaks or visible damages at regular intervals.
• In case of any leaks or visible damages to
the fitting or connection hoses, these should
be immediately checked by a specialist and
replaced if necessary.
Decommissioning
Cut off the water supply before dismantling
the product.
• Pay attention to escaping residual water.
• Disassemble the product in the reverse order
of the assembly instructions.
 The illustrations are to be considered as
figurative representations, deviations of
the product are possible. Subject to
technical modifications.

GUARANTEE CARD

Franz Joseph Schütte GmbH assumes a
manufacturer's warranty for the fittings you
have purchased in accordance with the war-
ranty conditions on our website. Your warranty
claims arising from the purchase agreement
with the Seller, as well as your statutory rights
are not limited by this warranty.
You will find our warranty conditions on our
website under the following link:
web.fjschuette.de/garantie/
garantiebedingungen.pdf
This guarantee card is only valid with the
pertinent original sales slip.
Service address
Franz Joseph Schütte GmbH
Hullerweg 1
49134 Wallenhorst (Germany)
 +49 (0) 54 07 / 87 07-0
info@fjschuette.de
www.fjschuette.de
13

Publicité

Table des Matières
loading

Table des Matières