Wolf ICBCT15I/S Guide D'utilisation Et D'entretien page 20

W O L F T R O U B L E S H O OT I N G
T R O U B L E S H O OT I N G
P R O B L E M
Cooktop does not
function at all
Induction elements do
not heat properly
Control panel blinks and
cooktop will not heat
G U I D E
G U I D E
P R O B A B L E C A U S E
Cooktop is in Lock mode.
No electricity is being
supplied to the cooktop.
Fuse is blown or circuit
breaker is tripped.
Cooktop is not connected to
a proper electrical circuit.
Improper cookware is
being used.
Power supply connection
is loose.
Cooktop is not connected to
a proper electrical circuit.
Improper cookware is
being used.
Unit may be in Showroom
mode.
C O R R E C T I O N
Touch and hold the
symbol for 3 seconds to unlock
the control panel.
Have an electrician check the
house power supply.
Have an electrician replace the
fuse or reset the circuit breaker.
Have an electrician verify that
the proper voltage is being
applied to the cooktop.
Select the proper cookware as
outlined in Cookware Selection
on page 19.
Have an electrician tighten
connections at the terminal box.
Have an electrician verify that
the proper voltage is being
applied to the cooktop.
Select the proper cookware as
outlined in Cookware Selection
on page 19.
Contact your Wolf dealer
for instruction.
21