Scope Of Delivery - Dometic WAECO PerfectCharge BI 01 Instructions De Montage Et De Service

Masquer les pouces Voir aussi pour WAECO PerfectCharge BI 01:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
PerfectCharge BI01
 Danger of explosions!
Never attempt to charge a frozen or defective battery.
Place the battery in a frost-free area and wait until the battery
has acclimatised to the ambient temperature. Then start the
charging process.
 Wear goggles and protective clothing when you work on
batteries. Do not touch your eyes when you are working on the
battery.
 Do not smoke and ensure that no sparks can arise in the vicinity
of the engine or battery.
NOTICE!
A
 Only use rechargeable batteries.
 Prevent any metal parts from falling on the battery. This can
cause sparks or short-circuit the battery and other electrical
parts.
 Make sure the polarity is correct when connecting the battery.
 Follow the instructions of the battery manufacturer and those of
the manufacturer of the system or vehicle in which the battery is
used.
 If you need to remove the battery, first disconnect the earth
connection. Disconnect all connections and all consumers from
the battery before removing it.
3

Scope of delivery

No. in
fig. 1,
Description
page 3
1
BI01 battery indicator
2
Connection cable with cable lugs
3
Wall bracket for the battery indicator
Installation and operating manual
EN
Scope of delivery
23

Publicité

Table des Matières
loading

Table des Matières