Scope Of Delivery; Intended Use - Dometic PERFECTCHARGE BI01 Instructions De Montage Et De Service

PerfectCharge BI01
• Danger of explosions!
Never attempt to charge a frozen or defective battery.
Place the battery in a frost-free area and wait until the battery has accli-
matised to the ambient temperature. Then start the charging process.
• Wear goggles and protective clothing when you work on batteries.
Do not touch your eyes when you are working on the battery.
• Do not smoke and ensure that no sparks can arise in the vicinity of the
engine or battery.
A
NOTICE!
• Only use rechargeable batteries.
• Prevent any metal parts from falling on the battery. This can cause
sparks or short-circuit the battery and other electrical parts.
• Make sure the polarity is correct when connecting the battery.
• Follow the instructions of the battery manufacturer and those of the
manufacturer of the system or vehicle in which the battery is used.
• If you need to remove the battery, first disconnect the earth
connection. Disconnect all connections and all consumers from the
battery before removing it.
3

Scope of delivery

No. in
fig. 1,
Description
page 3
1 BI01 battery indicator
2 Connection cable with cable lugs
3 Wall bracket for the battery indicator
— Installation and operating manual
4

Intended use

The BI01 battery indicator (ref no. 9600000094) is used as a capacity display for a
lead-acid battery. It can be mounted in one place, or is also suitable for mobile use.
As an option, it can also be used together with the MCP04, MCP07 and MCP15
battery chargers.
EN
Scope of delivery
11