Gram GEC Série Manuel D'utilisation page 9

Recall of PLU´s
Recall of a direct PLU´s (keys 1 – 24)
l In normal weighing mode, press once PLU´s key (1 – 24) to access to
PLU (inferior key)
l Press again the same PLU´s key to access to PLU (superior key)
Example:
1. Press once the
recalled. The display will show 3 below
2. Press again the same key
automatically recalled. The display will show 15 below
Recall of an indirect PLU´s (0 – 999)
1. In normal weighing mode, keep pressed the PLU until the balance
make a double beep, then release the key.
2. Use the numerical keys to introduce the desired PLU number and then
press the PLU key to recall it.
Change the value of a PLU´s
1. When the message
the unit weight value will flash
2. Change the unit weight value, according to previous procedure and press
PLU key to confirm and save.
WEIGHING ACCUMULATIONS M+
1. Place a weight on the weighing pan and input his weight, press the M+
key. When the balance makes a beep and the display shows the
key, the PLU number 3 will be automatically
, the PLU number 15 will be
appears on the display, press the PLU key,
8
.
.