Gram GEC Série Manuel D'utilisation page 12

INTRODUCTION OF TARE VALUE
(Through the keyboard)
1. In weighing mode, input the Tare value using the numerical keys (The unit
weight is grams)
2. Press the
seconds, the entered value will be automatically deleted)
Note: Is not possible to input a Tare value that exceeds the capacity of
the balance.
AUXILIAR PLATFORM (B)
A/B
1. Press the
2. The initial zero is the zero configurated in calibration procedure. It means
that the weight located on the pan will be displayed accurately when the
balance is turned on.
3. Reset zero range is 10% of maximal capacity.
Configuration and calibration.
1. With balance disconnected, press and hold any key and then press the
key to connect it. The display will show the message CAL 1 .
C
2. Press the key to navigate through the different menus:
CAL 3, CAL 4 y CAL 5
3. Select the menu CAL 1, press the
configuration.
key to confirm and save. (If this key is not pressed in 4
key to activate the balance (A) or the auxiliar platform (B)
to access to general
11
I
CAL 1, CAL 2,