Gram GEC Série Manuel D'utilisation page 8

Example
To input the unit weight of a piece of 0,5 g: Press:
1. Press the PLU key, the message
2. Press the desired PLU key, for example:
show 3 then the symbol
3. Press again the
symbol
4. Press the PLU key to confirm, after a bip the unit weight for PLU 15 will
be of 0,5 g.
Configuration of indirect PLU´s
1. Input the unit weight of the piece (see sampling introduction section)
2. Press the PLU key, the display will show the message
flashing.
3. Use the numerical keys to select the desired PLU number.
4. Press the PLU key to confirm and save. The message
stop flashing. .
l If any data is entered in 30 seconds, the balance will automatically exit
of configuration mode and will return to normal weighing mode.
will flash.
key, the PLU indicator will show 15 then the
will flash.
( 0 ~ 999 )
will flash.
, the PLU indicator will
7
will