HEINE DELTA one Mode D'emploi page 8

Setting up
Charge the instrument fully before first use.
Charging
Charge the device outside of the patient environment (1.5 m).
Charging via USB (DELTAone and DELTA30)
Use a USB cable to connect the USB connector (4, 15) of the dermatoscope to a USB power supply
(e.g. HEINE E4-USB, PC or laptop).
®
Using the charging station (DELTA30)
Use the charging station to charge DELTA30. The blue LED on the charging station indicates contact with
the dermatoscope. The charge indicator is located on DELTA30.
Pay attention to the fact that no foreign objects are between the device and the charging station.
When using DELTA30, make sure that the charging station and DELTA30 are not contaminated.
The setting up and operation of the charging station is described in a separate instruction of use.
Charge indicator
A charge indicator (5,16) is located on the side or underside of the dermatoscope.
DELTAone
Instrument Charger
switched off connected
switched on
connected
DELTA30
Instrument Charger
switched off connected
switched on
connected
8/52
Battery
charging
full (≥ 25 %)
not
empty (< 25 %)
residual capacity (< 10 %)
Battery
100 %
full (99 % – 66 %)
sufficiently charged
(66 % – 33 %)
empty (≤ 33 %)
full (≥ 66 %)
sufficiently charged
not
(66 % – 33 %)
empty (33 % – 10 %)
residual capacity (< 10 %)
MED 176623
Charge indicator
green, flashing
full
orange, flashing
Green - 1
flashing
2019-09-12
green
green
orange
Charge indicator segments
Green - 2
on on
on
off flashing
off off
on on
off on
off off
off off
Orange - 3
on
on
on
flashing
on
on
on
flashing