Inserting/Replacing Battery; Type Of Battery; Battery Level Indicator - Nikon COOLSHOT PRO STABILIZED Mode D'emploi

Inserting/Replacing battery

„ Type of battery
„
En
3V CR2 lithium battery ×1
Es
Fr
„ Inserting/Replacing battery
„
De
1. Open the battery-chamber cover.
Rotate the battery-chamber cover counterclockwise and remove it.
It
2. Insert the battery.
Sv
To replace the battery, take out the old battery before inserting a new one.
Nl
Follow the battery insertion mark inside the battery chamber to insert the + and - ends of the battery in
Ru the correct orientation (insert so that the - end faces up). If the battery is not inserted correctly, the
Laser Rangefinder will not operate.
Pb
3. Attach the battery-chamber cover.
Pl
Rotate the battery-chamber cover clockwise and secure it firmly. When attaching the battery-chamber
Fi
cover, securely screw it all the way and check that it is secured.
• The battery-chamber cover may be difficult to rotate because this product uses a rubber seal to
No
maintain its waterproof capabilities.
Dk
Cz
„ Battery level indicator
„
Ro
Hu
After power on, displays for 2 seconds only.
After power on, displays for 2 seconds only.
Displayed continuously.
Blinks. After blinking 3 times, automatically
powers off.
12
Display Description
Sufficient power available.
Power getting low.
Prepare to replace the battery.
Low. Battery should be replaced with a new one.
The battery is empty.
Replace the battery.