Safety Instructions For Maintenance; Possible Malfunctions - Bartscher 200269 Mode D'emploi

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the de-
vice yourself.

7. Possible Malfunctions

Problem
No cooling
Weak cooling
The aforementioned problems are only examples. If these or other problems ap-
pear, turn the device off immediately and stop using it. Ask for help from qualified
specialist personnel in examining and repairing the device.
Cause
• Power cable improperly
connected
• Safety fuse has been
activated.
• Power outage
• Damaged temperature
regulator.
• The set temperature is
incorrect.
• The unit is in defrost mode.
• Heat source too close or
device exposed to direct
sunlight.
• Poor air circulation in the
device.
• Temperature set
improperly.
• Device is overfilled.
Solution
• Remove plug and connect it
again.
• Check safety fuse, check the
device by connecting it to
another socket.
• Check the power supply
• Contact a sales agent
• Correct the temperature
setting.
• Wait until defrost is finished to
check cooling power.
• Ensure sufficient space
between device and heat
source.
• Ensure sufficient space
between device's walls and
other objects
• Check settings, set a lower
temperature.
• Do not overfill device, remove
excess products.
- 31 -