Replacing The Fuse; Measurements - Chauvin Arnoux C.A 403 Mode D'emploi

Access to the fuse is by opening the back of the case.
Note : - The case can only be opened if the leads are disconnected.
- At the back of the case, there is a place with fuses in reserve.
Without accessories
Connect the C.A 403 in series in the circuit.
Place the switch on the appropriate 30 µA or 3 mA range.
Read the value on the appropriate scale by multiplying the value by the corres-
ponding reading coefficient.

REPLACING THE FUSE

MEASUREMENTS

11