To Change The Audio Mode; Changing The Tv Screen Display - Sharp XL-1000V Mode D'emploi

To Change the Audio Mode

Sound of the playback source can be switched among the STEREO,
MONO L, and MONO R modes.
The audio mode function is used when the left and right channels
have individual signals from each other.
Press the AUDIO MODE button until the desired audio mode is
displayed.
Each time the AUDIO MODE button is pressed, the mode will
change as follows:
STEREO MONO L
Notes:
z The initial audio mode setting is "STEREO".
z When playing a sound multiplexed disc on which a vocal and
music have been separately recorded, select the audio mode as
desired.
Changing the TV Screen Dis-
play
You can check the operation of the main unit by the on-screen dis-
play.
Each time the DISPLAY button is pressed during playback or in
the stop mode, the display will change as follows:
[During stop mode]
MONO R
[During playback]
Note:
The displays may differ depending on the discs.
STOP
TOTAL 44:16
01/10
Total playing time
PLAY
01/10 01:26
Elapsed time
XL-1000V
DISPLAY OFF
DISPLAY OFF
ENGLISH E-28