Sharp XL-1000V Mode D'emploi page 21

8
Select the desired menu number using the direct
search buttons on the remote control.
z Playback will begin.
z After playback has finished, the menu will reappear. Select
the menu number you want to play.
To interrupt playback:
Main unit operation:
Press the button.
To resume playback from the same point, press the
Remote control operation:
Press the button.
To resume playback from the same point, press the
To stop the current operation and return to the menu:
Press the button.
To completely stop the video CD:
Press the PBC AUTO/OFF button on the remote control to select
PBC OFF.
The P .B.C. mode will be cancelled and playback will stop. If you want
to play the video CD with P .B.C. again, press the PBC AUTO/OFF
button on the remote control and then the
To remove the video CD:
Whilst in the stop mode, press the
Press the disc eject button and remove the video CD.
Disc Eject Button
button again.
button.
( ) button.
(OPEN/CLOSE) button.
Notes:
z After removing the video CD, make sure to press the
CLOSE) button and close the disc compartment.
z When the unit enters the stand-by mode, the opened disc com-
partment cover will be closed automatically.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Notes:
z Playback control allows a video CD to be played back according
to instructions recorded on the disc. The "previous", "next",
"return" and "select" operations may function differently, depend-
ing on the PBC CDs.
z Some video CDs with playback control may have an "auto pause"
recorded on them. When such a disc is played, the screen will
stop automatically at the point where an "auto pause signal" has
been inserted.
z If the picture looks dirty when a video CD is played back, there
may be a scratch on the video CD. Replace it with another video
CD in good condition.
The P.B.C. function will not work in the following conditions.
z When repeat, random, programme, track digest, time search or
video intro play has been selected and playback begins.
z When track numbers are selected using the direct search buttons
and playback begins.
XL-1000V
(OPEN/
ENGLISH E-20