Disposal - Dometic PERFECTWALL PW1000 Instructions De Montage

PW1000, PW1500, PW1750
Programming the remote control and the wall switch
➤ Place the battery (see fig. n 1, page 2).
➤ Switch on the power supply.
✔ The receiver beeps once briefly.
➤ Press the programming button (fig. n 2, page 2) or the buttons
the wall switch simultaneously (fig. o 1 and 2, page 2) within 4 seconds.
✔ The receiver beeps once briefly.
➤ Press the programming button (fig. n 2, page 2) or the buttons
the wall switch simultaneously (fig. o 1 and 2, page 2) again briefly.
✔ The receiver beeps once briefly.
➤ Briefly press the button
✔ The receiver beeps four times briefly.
✔ The awning moves briefly.
Proceed as follows to pair the wall switch:
➤ Press the programming button (fig. n 2, page 2) twice.
✔ The receiver beeps twice briefly.
➤ Press the buttons
page 2).
✔ The receiver beeps five times briefly.
✔ The remote control or wall switch and awning are now set to one another.
8

Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
EN
(fig. o 3, page 2).
on the wall switch simultaneously (fig. o 1 and 2,
and
Disposal
and on
and on
15