Installing And Connecting The Dc Kit - Dometic DC-Kit6 Mode D'emploi

DC-Kit6
7

Installing and connecting the DC Kit

A
NOTICE!
The DC Kit may only be installed by a qualified workshop.
The following information is intended for specialists who are familiar with
the guidelines and safety precautions to be applied.
A
NOTICE!
Observe the information in the installation and operating manuals when
installing the components supplied
• SinePower MSI2324T inverter
• MCR-9 remote control
• ECL-103 charging current distributor
and for your Dometic roof air conditioner
• B2600, B3200
• FJ1100, FJ1700, FJ2200, FJ2600, FJ3200
Note the following safety instructions during installation:
A
NOTICE!
• Note the location of wiring harnesses, wiring and other components
within the installation area.
• Install the DC Kit using the following instructions. Improper
installation of the DC Kit can put the safety of the user at risk and
lead to irreparable damage to the DC Kit or other devices.
• Disconnect all power supply lines to the individual components and
the roof air conditioner.
EN
Installing and connecting the DC Kit
11