Velleman VMM501 Mode D'emploi page 14

Have a look at the code below.
1. Drag and drop the code blocks to form the code as shown.
You can find the
You can find the
Drawer.
Select the A option in the
Drag 3
A
Set pin P0 in the first
(red LED on).
Set pin P1 in the second
0 (green LED off).
Set pin P2 in the third
(blue LED off).
V. 01 – 17/01/2019
on button
digital write pin
digital write pin P0
pressed block.
digital write pin
digital write pin
digital write pin
VMM501
A pressed block in Input
P0 to 0 block in
on button A pressed block.
to 0 blocks and insert them in the
P0 to 0 block, and set value 0 to 1
P0 to
P0 to 0 block, and set value to 0
14
in the Code Drawer.
Pins in the Code
on button
0 block, and set value to
©Velleman nv