AEG IAE64843FB Notice D'utilisation page 18

18 www.aeg.com
Problem
The display does not react
to the touch.
Wrong language is set.
A cooking zone deactivates.
A warning message saying
the cooking zone is going to
switch off comes on.
and a message come on.
O - X - A appears.
blinks.
and a number come on.
You can hear a constant
beep noise.
9.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
Possible cause
Part of the display is covered
or the pots are placed too
near to the display.
You changed the language
by mistake.
Automatic Switch Off deacti-
vates the cooking zone.
Lock operates.
Child Lock operates.
There is no cookware on the
zone.
The cookware is unsuitable.
The diameter of the bottom
of the cookware is too small
for the zone.
There is an error in the hob.
The electrical connection is
incorrect.
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
Remedy
Remove the objects. Move
the pots away from the dis-
play.
Reset all functions to the fac-
tory settings. Select Reset All
Settings from the Menu.
Refer to "Daily use".
Deactivate the hob and acti-
vate it again.
Refer to "Daily use".
Refer to "Daily use".
Put cookware on the zone.
Use suitable cookware. Refer
to "Hints and tips".
Use cookware with correct
dimensions. Refer to "Tech-
nical data".
Deactivate the hob and acti-
vate it again after 30 sec-
onds. If comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin-
ues, speak to an Authorised
Service Centre.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the
installation.