Product Safety - Lukas LX CLAW Mode D'emploi

2. PRODUCT SAFETY

de
LUKAS products are developed and manufactured to ensure the best performance
en
and quality when used as intended�
Operator safety is the most important consideration of the product's design�
fr
Furthermore, the instruction manual is intended to help you use LUKAS products
safely�
es
In addition to the operating instructions, all generally applicable, legal and other
binding regulations pertaining to the prevention of accidents and protection of the
pt
environment must be observed and operators must be instructed accordingly�
it
The device may only be operated by persons with appropriate training in the safety
aspects of such equipment, otherwise, there is a risk of injury�
nl
We advise all users to read the operating instructions carefully before using the
device, and to follow the instructions contained therein without any restrictions�
da
We also recommend that you have a qualified trainer teach you how to use the
product
sv
fi
el
pl
Even if you have already received instructions on how to use the equipment, you
should still read through the following safety instructions again�
cs
sk
hu
ro
bg
sl
hr
et
lv
lt
zh
ko
ja
ar
18
WARNING / CAUTION!
The operating instructions for the other equipment and accessories
used must also be observed�
WARNING / CAUTION!
Please ensure that the equipment and accessories used are able to
withstand the LX CLAW's maximum load�
Please ensure that no body
parts or clothing are caught
between the visibly moving
parts or between the working
equipment and support
bearings�
Wear protective clothing,
a safety helmet with visor,
protective footwear and safety
gloves
Working under suspended
loads is not permitted where
such loads are being lifted only
by means of hydraulic devices�
If this work is unavoidable,
sufficient mechanical supports
are also required�
Inspect the device before and
after use for visible defects or
damage