EINHELL LE-EH 2400 Mode D'emploi page 11

Anleitung LE-EH 2440 SPK 7
pile-ups.
Do not cover the vent slots.
8. Care and maintenance
Caution! Interrupt the power supply by pulling the
plug out of the socket-outlet before you carry out any
checks or maintenance work on the machine.
Clean the machine regularly. This will help to keep
the machine in good working order and is the
basis for a long working life.
When you are finished with your work, take off the
loading funnel and clean the inside. Use a brush to
remove deposits from metal parts on the inside.
When you mount the loading funnel, make sure
that the safety switch and the release screw are
clean.
Keep the vent slots clean while you work.
Clean the plastic body and other plastic parts with
a mild household cleaning agent and a damp
cloth. Do not use any aggressive agents or
solvents for cleaning purposes.
Never clean the shredder by spraying with water.
Prevent water getting inside the machine at all
cost.
9. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
10. Waste disposal
Accessories and packaging should be disposed of in
an environment-friendly fashion, i.e. by taking them
to a recycling depot. Plastic parts are coded for
purposes of separation when recycling.
17.10.2003 8:49 Uhr Seite 11
GB
11