Technical Data - Bosch PML LI Notice Originale

OBJ_BUCH-1197-004.book Page 10 Thursday, October 10, 2013 8:46 AM
10 | English
16 Release lever
17 Rubber ring (2x)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Cordless Worklight
Article number
1)
Rated voltage
1)
Lighting duration, approx.
Operating temperature
2)
Weight
1) Depends on the battery pack (1.3/1.5 Ah) being used
2) Battery adapter, flexible neck and lamp head
The colour rendition of illuminated objects can be distorted.
Assembly
Battery Insertion/Removal (see figure A)
Inserting the battery
 Use only original Bosch lithium ion batteries with the
voltage listed on the nameplate of your cordless work-
light. Using other batteries can lead to injuries and pose a
fire hazard.
Insert a charged battery 14 into the battery adapter 12. Take
care to insert the battery in the right position, and that the
battery unlocking button 15 can be felt to engage in the bat-
tery adapter 12.
Removing the battery
To remove the battery 14, press the battery unlocking button
15 and pull the battery toward the rear out of the cordless
worklight. Do not exert any force when doing this.
Battery Adapter (see figure B)
 Mount components to the worklight only when the bat-
tery 14 is not inserted.
Note: When inserting a completely mounted cordless work-
light with the battery into the battery charger, the cordless
worklight is automatically deactivated.
Connecting the lamp head with flexible neck to the battery
adapter 12 makes a stand-lamp; connecting the head lamp to
the connection cableon the universal adapter makes a head
lamp, or connecting the lamp head to the pipe clamp makes a
spotlight.
Connect the base of the flexible neck 2 or the base of the con-
nection cable 3 with the battery adapter 12. Do not pull the
cable!
The On/Off switch 11 as well as the operation and charge-
control indicator 10, which lights up green as soon as a bat-
tery is inserted and the cordless worklight is switched on, are
on the battery adapter 12. When the battery capacity is below
25 %, the indicator lights up red.
1 609 92A 0EV | (10.10.13)
Storage in the Protective Pouch
(see figures C–D)
The protective pouch 9 is used for storage of the battery 14
together with the battery adapter 12. Position the battery
adapter in such a manner that you can operate the On/Off
switch 11 behind the symbol on the pouch. The connection
cable 3 can be conducted through the slot in the pouch.
PML LI
The protective pouch 9 can be fastened to your belt by the
3 603 J74 300
loop on its backside or to any object with a Velcro strap.
V= 14.4/18.0
Mounting to a Stand-lamp (see figures B and E)
h 4.0/6.5
With the flexible neck 2, you can convert the cordless work-
°C –10...+40
light to a stand-lamp.
g 250
– Guide the base of the flexible neck alongside the guide
grooves in the seat of the battery adapter 12 until it
engages.
– Insert lamp head 1 into the flexible neck 2 until it engages.
– Insert the plug of the cable from the flexible neck 2 into the
socket of the lamp head 1.
– Insert a battery (see "Inserting the battery", page 10).
Removing the Lamp Head (see figure F)
Firstly, switch off the cordless worklight and remove the bat-
tery. To remove the lamp head 1, pull out the cable, lightly
press release lever 16 upward and pull the lamp head toward
the rear off of the component.
Mounting with Pipe Clamp (see figures B and G)
The pipe clamp 8 is used for fastening the cordless worklight
to pipes, handrails, tent poles, etc.
For optimal alignment of the light beam, the pipe clamp can
be swivelled up to 12.5° to the right or left.
Mounting with Head Strap (see figures B and H)
With the universal adapter 6 and the head strap 5, the cord-
less worklight can be used as a headlamp.
The universal adapter 6 can be tilted for optimal alignment of
the light beam.
Universal Adapter with Velcro Strap
(see figures B and I)
With the universal adapter and a Velcro strap, the cordless
worklight can be used anywhere.
The universal adapter 6 can be tilted for optimal alignment of
the light beam.
Operation
Initial Operation
Switching On and Off
To start the cordless worklight, press the On/Off switch 11.
To save energy, only switch the cordless worklight on when
using it.
Bosch Power Tools