Energy Saving; Start Pumps; Card Check; Counter - LAVAZZA LB 2500 PLUS Guide D'utilisation

Masquer les pouces Voir aussi pour LB 2500 PLUS:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35
E N

ENERGY SAVING

The machine is programmed to be able to go into
energy saving mode after a certain time of inactiv-
ity. The preset value is 2 hours.
In Energy Saving mode the display on the machine
shows:
ENERGY SAVING
To bring the machine back to ready mode it is suf-
ficient to press any selection button. By confirm-
ing the "Energy Saving" item with "Enter" you can
choose between the following two options by
pressing the 4 and 5 buttons:
Energy saving deactivated
Energy saving activated
You can choose to activate or deactivate Energy
Saving using the "Enter" button. Press the "Esc" but-
ton one or more times to go back to previous menu
levels or to exit the menu.

START PUMPS

By confirming the "Start pumps" item with "Enter"
you can choose between the following two options
by pressing the 4 and 5 buttons:
Start pumps activated
Start pumps deactivated
You can choose to activate or deactivate the func-
tion using the "Enter" button.
Press the "Esc" button one or more times to go back
to previous menu levels or to exit the menu.
The start pumps function can be executed, in ma-
chine ready mode, by pressing buttons 3 and 6 at
the same time for at least 3 seconds.
Before activating the start pumps function
a cup or glass must first be positioned under
the nozzle, on the cup-support rack.
During start pumps the display will show the fol-
lowing message:
PUMPS IN PROGRESS
24
SETTINGS MENU
START
According to the result of the process and at the
end of it, the display will show the following mes-
sage.
START PUMPS
POSITIVE/NEGATIVE
When the machine is started for the first time or af-
ter a prolonged period of not being used, it may be
necessary to refill the water system. The function, if
activated beforehand from the menu, is executed
automatically by the machine by pressing buttons
3 and 6 at the same time for at least 3 seconds.

CARD CHECK

This function allows the operator to check a chip
card, independently of its use. By confirming the
"Check card" item with "Enter" the display will show
the following message.
INSERT CARD
By inserting a chip card into the slot on the machine
the information on it will be shown on the display.
Pull out the chip card and press the "Esc" button
one or more times to go back to previous menu lev-
els or to exit the menu.

COUNTER

This function allows analysis of the drinks dispensed
totalizer and of the statistics for the various selec-
tions on the machine.
By confirming the "Counter" item with "Enter" you
can run through the various totalizers by pressing
the 4 and 5 buttons.
Tot drinks dispensed 000079
Tot product 1 dispensed 000027
. .
. .
Tot product 6 dispensed 000008

Publicité

Table des Matières
loading

Table des Matières