Adjusting Monitor Brightness And Angle; Adjusting The Backlight; Adjusting The Angle Of The Monitor - Sharp LL-T1610W Manuel D'utilisation

Adjusting monitor brightness and angle

Adjusting the backlight

Carry out the commands without the On Screen Display
(OSD) Menu displayed. If the OSD Menu is displayed,
press the MENU button (several times may be required)
and begin when the OSD Menu has disappeared.
1. Without the OSD Menu being displayed, push the
or the button.
The [BRIGHT] bar will be displayed on the screen.
2. Adjust by pressing the
(lighter).
Note:
• The BRIGHT bar automatically disappears several
seconds after the last command.
button (darker) or button

Adjusting the angle of the monitor

Lightly holding both sides of the monitor, adjust it to a
suitable viewing angle.
CAUTION!
• Pressure from hands on the LCD panel could cause
damage.
25
30
45
45