Eurocave V166-V266 Mode D'emploi page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Your EuroCave cabinet has been designed to be evolutionary. Depending on the model, it enables you to adapt it to your needs, and evolve in terms of storage:
I - Various types of storage
Universal storage shelf
Ref:AXUH
Capacity: 77 Bottles
Max. weight: 100 kg
Bordeaux storage shelf
Ref:AXBH
Capacity: 78 Bottles
Max. weight: 100 kg
Universal sliding
shelf with "Main du
sommelier" supports
Ref :ACMS
Capacity: 12 Bottles
Your wine cabinet's configuration can be modified according to your requirements. Refer to pages 51 to 52 for a
selection of storage simulations.
II - Recommendations on your wine cabinet layout
Your EuroCave wine cabinet has been designed to hold a maximum number of bottles in complete safety. We recommend that you abide by the following
suggestions in order to optimise its storage capacity.
- Please distribute your bottles as evenly as possible on the various shelves in your cabinet, in order that the weight is distributed over a wider area. Also
make sure that bottles do not touch the back or the walls of the cabinet.
- Please distribute bottles as evenly as possible over all of the upper area of the wine cabinet (try not to put all your bottles either at the top, or at the
bottom).
- Be sure to follow the storage recommendations according to the type of storage shelves in your cabinet, and never pile bottles on top of each other on
a sliding shelf.
- If you are equipped with sliding shelves, it is preferable to place these at the top of the cabinet for ease of daily access.
- For the same reason, place one or two bottles of each of your various wines on the sliding shelves and keep you reserve bottles on the storage shelves.
You then only have restock the top shelves a you drink a bottle.
- When using your wine cabinet, never pull out more than one sliding shelf at a time.
III - Adding sliding shelves
When you purchase your cabinet, the sliding shelves are already adjusted to
ideally suit the internal dimensions of your appliance. If you buy a new sliding
shelf, you may need to carry out this adjustment.To do so, unscrew the screws
(1) of the first right or left runner (2) (2 screws) then position the runner at
the desired width and screw the screws. Repeat the procedure for the second
runner (if necessary).
6 - L
AYOUT
Articulated presentation
kit Ref:AOPRESAR
Capacity: 32 Bottles
Presentation shelf
Ref:ACPH
Capacity: 22 Bottles
Champagne sliding
shelf Ref:ACHH
Capacity: 10 Bottles
2
– S
TORAGE
1
2
Magnum sliding
shelf with "Main du
sommelier" supports
Ref:ACGMS
Capacity: 7 Bottles
Tasting sliding shelf
Ref:ACVH
Capacity: 20 Bottles
9
EN

Publicité

Table des Matières
loading

Table des Matières