Wiring The Device Modules; Communication Modules - Lenze L-force 9400 Instructions De Montage

6

Wiring the device modules

The equipment of the device with modules depends on the device variant or on the
application. A short description of the different device modules follows. More detailed
information is given in the corresponding documentation.
6.1

Communication modules

Use these modules in extension module slot
Ethernet
Valid as of hardware version: VA
Fig.6-1
Connections
Pos. Description
X215 Ethernet connection, RJ45 socket to EN 50173
Displays
Pos. Colour
MS Green
L/A Green
DE Red
EDK94ASH24 DE/EN/FR/ES/IT 3.0
E94AYCEN communication module (Ethernet)
State
On
On
Blinking
On
Wiring the device modules
Communication modules
M1 or M2 M3
Description
The communication module is supplied with voltage.
The connection to the Ethernet network is established.
Data are being transmitted or received.
The communication module is not recognised by the
basic device (see notes given in the documentation on
the basic device).
6
M4.
E894YCEN001A
55