Lenze L-force 9400 Instructions De Montage page 58

6 Wiring the device modules
Communication modules
PROFIBUS
Fig.6-3
Connections
Pos. Description
X200 External supply of the communication module
Design: pluggable terminal strip with screw connection, 2-pole
X201 Connection for PROFIBUS-DP
Design: Sub-D socket, 9-pole
DIP switch
Pos. Description
Addressing of the bus device
Displays
Pos. Colour
MS Green
ME Red
BS Green
BE Red
DE Red
58
E94AYCPM communication module (PROFIBUS)
Condition
Blinking
On
On
Blinking
On
On
Description
Communication module is supplied with voltage, but has no
connection to the basic device (basic device is switched off,
initialising or does not exist).
Communication module is supplied with voltage and has
established a connection to the basic device.
An error occurred concerning the communication module.
Communication via the communication module is established. The
PROFIBUS is active.
Bus monitoring has responded.
The communication module is not accepted by the basic device
(see notes in the Instructions for the basic device)
E894YCPM001A
EDK94ASH24 DE/EN/FR/ES/IT 3.0