Setting Up Selphy - Canon SELPHY CP800 Guide D'utilisation

Caution

Unplug the product from the power outlet when you are not using it.

Do not place anything, such as cloth, on top of the printer while in use.
Leaving the unit plugged in for a long period of time may cause it to overheat and become distorted, resulting
in ire.

Setting Up SELPHY

More than the
length of the
paper
10 cm (4 in.)
or more

Never place SELPHY close to motors or other devices that generate strong electromagnetic ields.This
may damage the printer or cause it to malfunction.

Do not place near a television or radio. This may cause the printer to malfunction.
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
Denotes the possibility of damage to the equipment.

Place SELPHY on a stable and even surface, such as a
table. Never place it on an unstable or tilted surface.

Keep SELPHY at least 1 m (3 ft.) from devices emitting
electromagnetic waves or strong magnetic ields.

Make sure there is at least 10 cm (4 in.) of free space
around SELPHY.

Since paper will pass in and out of SELPHY during
printing, make sure the space behind the printer is greater
than the length of the paper.
10 cm (4 in.)
or more
5