Lcd Screen And Functions - Zodiac O'Clair pH First Notice De Montage Et D'utilisation

1.2.
1
2
3
4
5
Backlighted LCD screen.
1
Peristaltic pump (1.5 L/h).
2
Connection for linking the semi-rigid polyethylene injection tube.
3
Connection for linking the PVC crystal intake pipe.
4
Packing assembly: for passing the control cable directly to the filter (220 - 240V AC only
5
when filtration is in progress).
Packing assembly: for passing the cable linking the unit to the intake pipe sensor.
6
Packing assembly: for passing the 220-240V AC power cable.
7
BNC socket for connecting the pH sensor.
8
Master switch: for powering the control unit.
9
Navigation button "down": for navigating in the "Settings" menu.
10
"SET/ Esc " button: button for exiting from the "Settings " menu; also for displaying the pH
11
set point when pressed continuously.
Navigation button "up": for navigating in the "Settings" menu.
12
"CAL/ Enter " button: button for enabling the sensor calibration mode (the button must be pressed
13
for 5 seconds). This is also used for accepting changes in the " Settings " menu.

LCD screen and Functions

6 7
13
12
11
10
9
8
EN
23