Ryobi EAG2000RS Manuel D'utilisation page 7

GB
FR DE ES
tool.
p. Grip the tool securely with both hands while
operating.
SYMBOL
Safety Alert
V Volts
Hz Hertz
Alternating Current
W Watts
n º No-load speed
n Rated speed
min ¹ Revolutions or reciprocations per minute
CE Conformity
Double insulation
Wear ear protection
Wear eye protection
Please read the instructions carefully before
starting the machine.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environmental-
friendly recycling.
SPECIFICATIONS
Grinding wheel
Frequency
Voltage
Input
Spindle thread
Rated speed
IT NL PT DK SE
230 mm (9 in)
50 Hz
230 V - 240 V
2000 W
M14
6000 min ¹
FI NO RU PL CZ
English
Overall length
Net weight
NOTE: Be sure to check the nameplate on the product,
because the voltage is subject to change depending on
the area in which the product is to be used.
Maximum circumferential speed of grinding wheel: 4,800
m/min.
Example of calculation
3.14 x 230 x 6,000/1,000 =
3.14 x 180 x 6,000/1,000 =
Circumferential speed of
grinding wheel
Wheel diameter
Rated speed of grinder
STANDARD ACCESSORIES
Auxiliary handle
A grinding wheel is included in the standard accessories
for some countries.
OPERATION
See ¿ gure 4.
Keep safety guards in place. Never cover the air vents
since they must always be open for proper motor
cooling.
The key to ef¿ cient operating is controlling the pressure
and surface contact between the disc and workpiece. Flat
surfaces are ground at an acute angle, usually 10 to 20
degrees with the workpiece. Allow the disc to reach full
speed before starting to grind. Too great an angle causes
concentration of pressure on a small area which may
gouge or burn work surface.
SWITCH
See ¿ gure 2.
„ To switch on the unit, press forward the safety lock
and then press the on/off switch.
„ To switch off the unit, release the on/off switch.
3
HU RO LV LT EE
470 mm
6.0 kg
4,333.2
3,391.2
4,333.2/3,391.2
230/180
6,000
WARNING
HR SI SK GR TR