Maintenance And Cleaning; Disposal - Parkside PDLA 6.3 A1 Instructions D'origine

Pince à soyer et à poinçonner pneumatique
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25

Maintenance and cleaning

WARNING! RISK OF INJURY!
Disconnect the appliance from the
compressed air supply.
NOTE
To ensure correct functioning and a long
service life for the appliance, note the follow-
ing points:
Service the appliance regularly, depending
on use.
Oil all moving parts.
Tighten the screws.
Check that the trigger
Sufficient and continuously intact oil lubrication
is highly important for optimum functioning.
Use only the genuine replacement parts
recommended by the manufacturer, otherwise
you could put users at danger. In doubt, contact
the Service Centre.
Use only accessories and supplies of the sizes
and types recommended by the manufacturer.
Only clean the appliance with a soft, dry cloth
or with compressed air.
Never use sharp or scratchy cleaning agents
under any circumstances.
GB │ IE
18 
is functioning properly.

Disposal

The packaging consists of environmen-
tally friendly material. It can be dis-
posed of in local recycling containers.
Do not dispose of the appliance in the normal
domestic waste!
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary. The packag-
ing material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites.
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product.
The product is recyclable, subject to
extended producer responsibility and
is collected separately.
Dispose of lubricants and cleaning agents in an
environmentally friendly manner. Observe the legal
regulations.
Dispose of lubricant residues at a disposal
point. Do not allow lubricants to enter drains or
watercourses. Do not allow them to get into the
subsoil/soil. Make sure you use a suitable mat/
surface. Dispose of lubricants in accordance
with official regulations.
Dispose of contaminated maintenance material
and consumables at a collection point provided
for this purpose.
WARNING!
Inform yourself about the health hazards of
the oil used in the safety data sheet of the
respective manufacturer.
PDLA 6.3 A1

Publicité

Table des Matières
loading

Table des Matières