Husqvarna 530iPX Manuel D'utilisation page 8

• Use sturdy non-slip boots or shoes.
• Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
• Keep first aid equipment close at hand.
Safety devices on the product
WARNING: Read the warning instructions
that follow before you use the product.
• Do not use a product with defective safety devices.
• Do a check of the safety devices regularly. Refer to
Maintenance schedule on page 15 .
• If the safety devices are defective, speak to your
Husqvarna servicing dealer.
To do a check of the keypad
1. Push the start/stop button (A).
a) The product is on when the LED (B) is on.
b) The product is off when the LED (B) is off.
2. If the warning indicator (C) is on or flashes. Refer to
Keypad on page 22 .
To do a check of the power trigger lockout
The power trigger lockout is designed to prevent
accidental operation. When you press the lock (A) it
releases the power trigger (B). When you release the
handle, the power trigger and the power trigger lockout
8
both move back to their original positions. This
movement is operated by independent springs.
1. Make sure that the power trigger is locked when the
2. Press the power trigger and make sure it returns to
3. Make sure that the power trigger and the lock moves
B
C
A
4. Start the product, see
5. Apply full throttle.
6. Release the power trigger and make sure that the
B
lock is in its original position.
its original position when you release it.
freely and that the return spring works properly.
To start the product on page
13 .
cutting attachment stops and remains still.
A
774 - 001 - 12.11.2018