Husqvarna 530iPX Manuel D'utilisation page 16

Maintenance
Make sure that the power trigger and the
power trigger lockout function correctly from
a safety point of view.
Make sure that all controls work and are not
damaged.
Keep the handles dry and clean. Makes sure
that that there is no oil and grease on the
handles.
Make sure that the saw chain cover is not
damaged. Replace the saw chain cover if it is
damaged.
Make sure that the screws and nuts are tight.
Clean the oil tank cap
Make sure that the battery release buttons
on the battery works and locks the battery in
the product.
Examine that the battery charger is not dam-
aged and function correctly.
Make sure that the battery is not damaged.
Make sure that the battery is charged.
Make sure that the battery charger is not
damaged.
Examine all cables, couplings and connec-
tions. Make sure that there is no damage or
dirt.
Clean the saw chain cover.
Examine the wear of the chain drive sprock-
et.
Replace the chain drive sprocket after ap-
proximately 50 hours of operation or more
frequently if it is necessary.
Do a check of the connections between the
battery and the product. Do a check of the
connection between the battery and the bat-
tery charger.
Make sure that the saw head is not dam-
aged. Replace the saw head if it is damaged.
To examine the battery and the
battery charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
16
Daily
X
X
X
X
X
X
X
X
X
X
X
An approved Husqvarna dealer must do all servicing on the saw
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
Weekly
X
X
X
head.
774 - 001 - 12.11.2018
Monthly
X