Risk Of Injury - Unitec SKF 025 Mode D'emploi

Risk of injury

CS Unitec, Inc., 22 Harbor Ave., Norwalk, CT 06850 • Toll-free: 800-700-5919 • Ph: 203-853-9522
Fax: 203-853-9921 • Email: info@csunitec.com • Website: www.csunitec.com
SKF 25
WARNING
Improper handling of the machine increases the risk of
injury!
Observe the following safety precautions to avoid injuring your-
self and/or others:
► Operate the machine only with the protective equipment
stipulated in these operating instructions (see Personal
protective equipment section).
► Remove loose jewellery before beginning work. Wear a hair
net if you have long hair.
► Always switch off the machine before changing tools, per-
forming maintenance or cleaning. Wait until the machine has
come to a complete standstill.
► Always remove the plug from the mains socket before
changing tools, cleaning or performing maintenance work in
order to avoid unintentional starting of the machine.
► Do not put your hand into the machine while it is in opera-
tion. Remove swarf only when the machine is at a standstill.
► Do not allow the connecting lead to hang over edges (trip
wire effect).
Safety
31