Safety Equipment; Overload Protection; Personal Protective Equipment - Unitec SKF 025 Mode D'emploi

Safety equipment

Overload protection

Swarf guard

Personal protective equipment

CS Unitec, Inc., 22 Harbor Ave., Norwalk, CT 06850 • Toll-free: 800-700-5919 • Ph: 203-853-9522
Fax: 203-853-9921 • Email: info@csunitec.com • Website: www.csunitec.com
SKF 25
A motor protection switch protects the milling motor against over-
loading.
The machine is equipped with swarf protection that largely pre-
vents swarf from spinning out. The swarf falls out underneath the
machine during milling.
Wear the following protective equipment at all times when operat-
ing the machine:
Symbol Meaning
Close-fitting work protection clothing with a low tear
strength
Goggles for protecting eyes against flying parts and
liquids
Safety shoes for protecting feet against falling objects.
Also wear the following protective equipment during special work:
Symbol Meaning
Gloves for protection against injury
Ear protection in areas with high noise emission > 80
db(A)
Safety
33