Publicité
Les langues disponibles
Les langues disponibles
OPERATION
SPEED SELECTION
Connect the plug to the power socket.
Your fan is equipped with a 4-position switch, to choose among 3 f
an speeds or turned off.
0 : Stop
I : Low speed
II : Middle speed
III : High speed
Operate the switch manually, by positioning the fan speed you
desired, as indicated above.
OSCILLATION
Fan can oscillate from right to left, depending on your convenience.
Button oscillation is placed at the top of the fan.
When the button is drawn, the fan does not oscillate.
When the button is pushed, the fan oscillates..
ORIENTATION OF THE VENTILATED AIR
The airflow can be directed to your request, up or down. To make
this adjustment, loosen the wheel tilt adjustment, located on the
fan body. Be sure to tighten the knob after adjustment.
CLEANING AND STORAGE
Be sure your fan is in the OFF position.
Unplug the fan before cleaning.
Use only a soft cloth to gently wipe the fan clean.
DO NOT immerse the fan in water and never allow water to drip
into the motor housing.
DO NOT use gasoline, paint thinner or other chemicals to clean the
fan.
For storage, clean the fan carefully as instructed and store your
fan in a cool dry place.
24 25
|
GB
Publicité
