Troubleshooting; Specifications - Sony LMD-2110MD Instructions D'utilisation

Troubleshooting

This section may help you isolate the cause of a problem
and as a result, eliminate the need to contact technical
support.
• The display is colored in green or purple t Select
the correct input from the RGB/COMP SEL setting in
the SYSTEM SETTING menu (page 48).
• The unit cannot be operated t The key protection
function works. Set the KEY INHIBIT setting to OFF
in the KEY INHIBIT menu.

Specifications

Picture performance
LCD panel a-Si TFT Active Matrix
Picture size 21.5 type
477 × 268, 547 mm
(W/H, Diagonal)
7
(18 / × 10
8
Resolution 1920 × 1080 dots
Viewing angle (LCD panel specifications)
(up/down/left/right, contrast > 10:1)
80°/80°/85°/85° (typical)
Scan Normal 0%
Over 5%
Aspect 16:9
Display color 16,770,000
Input/output connectors
Input
LINE input connectors
Y/C input 4-pin mini-DIN (1)
VIDEO input
BNC type (1), 1 Vp-p ±3 dB, negative
synchronization
AUDIO input
Phono jack (1), –5 dBu 47 kilohms or
higher
RGB/COMPONENT input connectors
BNC type (3)
RGB input 0.7 Vp-p ±3 dB, (Sync On Green,
0.3 Vp-p negative sync.)
Component input
0.7 Vp-p ±3 dB, (75% chrominance
standard color bar signal)
AUDIO input
Phono jack (1), –5 dBu 47 kilohms or
higher
OPTION IN connector
D-sub 9-pin (1), female
OPTION AUDIO IN connector
Phono jack (1), –5 dBu 47 kilohms or
higher
External synchronized input connector
BNC type (1), 0.3 Vp-p to 4.0 Vp-p ±
bipolarity ternary or negative
polarity binary
HDMI IN connector
HDMI (1)
PARALLEL REMOTE input connector
Parallel remote
Modular connector 8-pin (1)
5 5
/ , 21 / inches)
8 8
Troubleshooting / Specifications
51