Télécharger Imprimer la page

Wilo CIF-Module Notice De Montage Et De Mise En Service page 7

Masquer les pouces Voir aussi pour CIF-Module:

Publicité

Les langues disponibles

Les langues disponibles

en
Product information
▪ The CIF modules are not designed for safe deactivation of the pump.
DANGER
Risk of fatal electrical shock!
If used improperly, there is a risk of fatal injury due to electric shocks!
• Never use the control inputs for safety functions.
• Never install the module in non-compatible devices.
4.1
Compatibility of the firmware
To ensure that all functions of the module are available, the following firmware ver-
sion must be installed on the product into which the module is installed:
Pump
Wilo-Stratos MAXO
Table 1: Firmware version
For compatibility with products not listed above, see
www.wilo.com/automation.
5
Product information
5.1
Type key
Example: Modbus RTU CIF module
CIF module
Modbus RTU
Table 2: Type key
5.2
Technical data
Technical data
General data
Terminal cross-section
Electric circuit
7
Version
≥ 1.00
"Communication Interface" module
Model/function identifier:
Modbus RTU = RS485 interface, Modbus RTU pro-
tocol
BACnet MS/TP = RS485 interface, BACnet MS/TP
protocol
²
1.5 mm
(max.)
SELV, galvanically isolated
WILO SE 2018-05

Publicité

loading