B - Error Codes; Technical Data - Olimpia Splendid Dolceclima Instructions Pour L'installation, L'emploi Et L'entretien

4.2.b - Error codes

during the appliance functioning, a few anomalies which stop its functioning could appear.
in these cases, some error codes appear on the control panel.
• 3 (flashes + Red led on) Excessive accumulation of water inside air conditioner
---------------------------------------------------------------------------------------------------------------------------------
• F1 filters cleaning.
---------------------------------------------------------------------------------------------------------------------------------
• 2 (flashes)
• 8 (flashes)
in these cases:
a. electrically disconnect the appliance
b. wait a few minutes
c. connect the plug to the power socket
d. restart the appliance.
If the inconvenience persists and the error code doesn't turn off, electrically disconnect the
appliance and refer to an Assistance Centre.

5 - TECHNICAL DATA

for the technical data, please consult the data plate applied to the product (fig.2).
• Dimensions (W x H x D)
• Weight (without packing)
• Maximum operating temperature
in cooling mode
(HP onlY)
• Minimum operating temperature
in cooling mode
(HP onlY)
* internal ambient temp.
** outside ambient temp.
460 x 767 x 395 mm
29 Kg
dB 35°C - WB 24°C * / dB 43°C - WB 32°C **
dB 27°C - WB 19°C * / dB 27°C - WB 19°C **
16°C * / 16°C **
dB 7°C * / dB 7°C **
EN - 33
DOLCECLIMA