Publicité
Les langues disponibles
Les langues disponibles
EN
• Before inserting the plug in the power socket, make sure that the appliance
starting switch (4) is in "0" (off) position. This precaution protects in case of
an improper or unexpected appliance start.
• Before starting the appliance, insert the desired accessory - hooks (11 or 12)
or whisk (7) - in the appliance control shaft.
Lower the arm (2) to allow the accessory immersion in the bowl (10) filled with
food.
• To avoid overheatings, the appliance must not be kept continuously functional
for:
-
Kneading (KB max) 10 minutes.
-
Whipping (KB max) 5 minutes.
-
Blending (KB max) 2 minutes.
-
Blender (KB max) 2 minutes.
-
Meat grinder (KB max) 6 minutes.
Since it has to perform processing in sequence or in longer times, perform
pauses of at least 20 minutes between the cycles reducing the continuous
functioning time.
☞
If the appliance is maintained functional for too long, it automatically
turns off. To turn the appliance back on, move the switch (4) back to
"0" and, subsequently, select the desired processing speed.
☞
In the event that, even after performing what is described above, the
appliance doesn't turn back on, it means that the thermal protector
has intervened. Move the switch (4) back to "0", disconnect the plug
from the power socket and wait at least 30 minutes before turning
the appliance back on to let the motor cool down.
Do not exceed the bowl (10) maximum capacity of 5 Lt. when inserting the
ingredients.
Insert foods to blend in the glass (2) after cutting them into small pieces, then
add liquid paying attention to NEVER exceed the maximum capacity.
48
GENERAL WARNINGS
SMX 5700
Publicité
