Publicité
Les langues disponibles
Les langues disponibles
EN
• Do not leave the appliance unnecessarily inserted.
Disconnect the plug from the mains power supply when the appliance is not
used.
• Do not obstruct the ventilation and heat elimination openings or fissures.
• If the power cord of this appliance is damaged, it must be changed exclusively
by a technical assistance centre authorized by the manufacturer, since special
tools are necessary.
This appliance electrical safety is ensured only when the appliance
itself is correctly connected to an efficient grounding system as
required by the current electrical safety standards.
• It is necessary to check this fundamental safety condition and, in case of
doubts, ask for an accurate system check from professionally qualified
personnel.
The manufacturer cannot be considered liable for possible damages caused
by the lack of grounding of the system.
• Before carrying out any operation turn off the appliance and disconnect the
power plug from the outlet.
• Don't connect the appliance to the power supply through external timers or
remote control systems.
Make sure that the power cord doesn't protrude from the bearing
plane in order to prevent someone from, even inadvertently,
pulling it toppling the appliance.
☞
Place the appliance on an horizontal and very stable bearing plane,
whose surface is not delicate (ex. lacquered furniture, tablecloths
etc.). Make sure that the appliance is safely supported.
Do not obstruct the cooling grids.
46
GENERAL WARNINGS
SMX 5700
Publicité
