Technical Data; Disposal - Beurer LB44 Mode D'emploi

Problem
Strange noise
Mist escapes
underneath the water
tank.

10. Technical data

Dimensions (LxWxH)
Cable length
Weight when empty
Mains voltage/frequency
Nominal power
Room size
Capacity
Evaporation output
Signs and symbols

11. Disposal

Observe the local regulations for material
disposal. Dispose of the device in
accordance with EC Directive 2002/96/
EC – WEEE (Waste Electrical and Electronic
Equipment).
Cause
There is too little water in the
water tank.
The device is not level and
unstable.
The water tank is not
positioned correctly on the
base unit.
approx. 25 cm x 12 cm x 34 cm
approx. 1.5 m
approx. 1.8 kg
230 volts / 50/60 Hz
25 watts
up to 25 m²
approx. 2.8 litres
220 ml/hour
The unit is double-protected and thus corresponds to
protection class 2.
17
Solution
> Fill the water tank
> Place the device on a firm, level
surface
> Lift up the water tank
> Check whether the join between the
base unit and water tank is clean
> Clean if required
> Position the water tank correctly on
the base unit
The tank should sit tightly on the base
unit.
If you have any questions, please contact
the local authorities responsible for waste
disposal.