What If There Are Problems; Technical Data - Beurer LA 40 Mode D'emploi

10. What if there are problems?

Problem
No mist is being
emitted from the
device�
Only a small
amount of mist
is being emitted
from the device�
The LED of the
Mist/timer button
is illuminated and
the device is run-
ning, but no mist
is emitted�
If you cannot find a solution to your problem here, contact our Customer Services�

11. Technical data

Product name
Power consumption
Water tank capacity
Room size
How it works
Mist settings
Running time
Timer duration
Weight
Dimensions
Cause
Mains adapter is not
plugged in�
There is not enough water
in the water tank�
There is too much water in
the water tank�
Ultrasonic vaporiser is
blocked�
The outlet in the porcelain
cover is blocked�
Condensation is blocking
the ventilation opening in
the water tank�
Solution
Insert the mains adapter into a
suitable socket�
Fill the water tank up to the
"MAX" marking�
Pour away excess water from
the water tank until it only reach-
es the "MAX" marking�
Clean the ultrasonic vaporiser as
described in the "Cleaning and
maintenance" chapter�
Check that the outlet in the por-
celain cover is not blocked�
Open the ventilation cover and
remove the condensation at the
ventilation opening�
LA 40
24 V DC, 12 W
180 ml
Up to approx� 20 m
Ultrasonic atomiser
Continuous mist and intermittent mist
approx� 9 hours of continuous mist
approx� 18 hours of intermittent mist
1 hour, 3 hours, 7 hours, continuous
operation
LA 40: approx� 508 g,
Adapter: approx� 80 g
Ø 129 mm x 167 mm
28
2